Step-by-Step Guide to Pairing and PartyCast Soundcore Speakers
Check the video above for a helpful guide on pairing Soundcore Flare 2 Speakers. It provides step-by-step instructions from the manufacturer to assist you in the process.
Check the video above for a step-by-step instructions to pairing Soundcore Mini 3 Pro Speakers.
PartyCast allows you to wirelessly synchronize your music across a large number of PartyCast-compatible speakers.
To pair speakers together, please follow the steps outlined below.
PartyCast - Primary Speaker:
Power on the speaker and connect it to your phone via Bluetooth.
Once the connection is established, press and hold the Bluetooth button for approximately 3-5 seconds until the button starts flashing white. On the Flare 2 speaker, you will also hear a sound confirmation.
Follow the instructions below to connect additional speakers. The light on the primary speaker will continuously flash.
PartyCast - Secondary Speaker:
Power on the secondary speaker.
For Soundcore Flare 2: Press and hold the Bluetooth button for about 3-5 seconds. You will hear a sound, and the light on the speaker will flash white and then become solid. For Soundcore Mini 3 Pro: Press the Bluetooth button for approximately 3-5 seconds until it begins flashing in white Quickly. Double-press on the Bluetooth button to initiate pairing with the primary speaker.
Allow 2-5 seconds for the speakers to establish a connection.
Once the Bluetooth light turns solid white, it indicates that the secondary speaker has successfully connected.
Ensure that there are no electronic devices positioned between the two speakers, and make sure the distance between them does not exceed 5 meters.